Simple Software
Maintenance
Training
Troubleshooting
- Cutting Issues
- Optimising
- Printer
- AIT
- OFK
- Error Codes
  - Errors 0-9
    - Error 0
    - Error 1
    - Error 2
    - Error 3
    - Error 4
    - Error 5
    - Error 6
    - Error 7
    - Error 8
    - Error 9
  - Errors 10-19
    - Error 10
    - Error 11
    - Error 12
    - Error 13
    - Error 14
    - Error 15
    - Error 16
    - Error 17
    - Error 18
    - Error 19
  - Errors 20-29
    - Error 20
    - Error 21
    - Error 22
    - Error 23
    - Error 24
    - Error 25
    - Error 27
    - Error 28
    - Error 29
  - Errors 30-39
    - Error 30
    - Error 31
    - Error 32
    - Error 34
    - Error 36
    - Error 37
    - Error 38
    - Error 39
  - Errors 40-49
    - Error 40
    - Error 42
    - Error 43
    - Error 44
    - Error 45
    - Error 46
    - Error 47
    - Error 48
    - Error 49
  - Errors 50-59
    - Error 51
    - Error 52
    - Error 53
    - Error 54
    - Error 55
    - Error 56
    - Error 57
    - Error 58
    - Error 59
  - Errors 60-69
    - Error 61
    - Error 62
    - Error 63
    - Error 64
    - Error 65
    - Error 66
    - Error 67
    - Error 69
  - Errors 70-79
    - Error 70
    - Error 71
    - Error 72
    - Error 73
    - Error 74
    - Error 75
    - Error 76
    - Error 77
    - Error 78
    - Error 79
  - Errors 80-89
    - Error 80
    - Error 81
    - Error 82
    - Error 83
    - Error 84
    - Error 85
    - Error 86
    - Error 87
    - Error 88
    - Error 89
  - Errors 90-99
    - Error 90
    - Error 91
    - Error 92
    - Error 93
    - Error 94
    - Error 95
    - Error 96
    - Error 97
    - Error 98
    - Error 99
  - Errors 100-109
    - Error 100
    - Error 101
    - Error 102
    - Error 103
    - Error 104
    - Error 105
    - Error 106
    - Error 107

All Files

Replace the saw blade

WHAT YOU NEED

Tools:Allen Key Set

Spare Parts:Saw Blade - ME1118

Safety Equipment:Standard Personal Protective EquipmentCut-resistant Gloves

Position and access the saw head

In the Manual Mode window, click . The saw head should automatically present itself to the front of the saw chamber with the blade facing the door.
Press the E‑stop button on the operator console.
Open the saw chamber door.

Replace the saw blade

CAUTIONSHARP BLADE: Wear cut-resistant gloves when handling the saw blade.

Take note of the teeth direction on the old saw blade to avoid confusion when installing the new saw blade.
Grasp the saw blade and remove the six bolts that hold the saw blade and the retaining plate onto the blade hub.
Remove the retaining plate and the saw blade.
Check the condition of the six bolts and replace any bolts that are bent, cracked or start to round out on the Allen key head.
Install the new saw blade on the blade hub then refit the retaining plate.
Refit and tighten the six bolts evenly in a criss-cross pattern, small amounts at a time, until they are tight.